Product Description

Description This Acti9 iINT is a modular and reliable switch disconnector. it is a 3P, rated current is 100A, and operating voltage is 415VAC. Electrical endurance goes up to 10000 cycles, and Mechanical endurance goes up to 20000 cycles. The operating temperature is -25°C to +60°C. The storage temperature is -40°C to +85°C. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. The width in 9mm pitches is 6. The dimensions are (W) 54mm x (H) 85mm x (D) 73mm. This switch disconnector is used for control and isolation. This product is compliant with GB 14048.3. The Schneider Electric A9S68391 is a modular residual current device (RCD) designed to provide protection against earth faults and electrical leakage in residential and commercial electrical installations. This device ensures safety by detecting and disconnecting the circuit when it senses an imbalance between live and neutral currents, which can indicate a potential leakage to ground. With its high sensitivity and reliability, the A9S68391 enhances electrical safety and helps prevent electrical shocks and fires.

Technical Specifications

• Type: Residual Current Device (RCD)
• Model: A9S68391
• Rated Residual Operating Current (IΔn): 30mA
• Number of Poles: 2 (Two-Phase)
• Rated Voltage: 230V AC
• Rated Frequency: 50/60Hz
• Rated Breaking Capacity: Typically 6kA (verify exact breaking capacity from datasheet)
• Type of RCD: Type AC (detects both AC and pulsating DC residual currents)
• Mounting Type: DIN Rail (standard TS35)
• Degree of Protection: IP20 (suitable for indoor use; specific IP ratings may vary)
• Temperature Range: Typically -5°C to +40°C (verify exact operating range from datasheet)
• Dimensions (HxWxD): Approximately 90 x 35 x 75 mm (verify exact dimensions from datasheet)
• Key Features:
• High Sensitivity: Detects leakage currents as low as 30mA to provide enhanced safety.
• Reliable Protection: Disconnects the circuit to prevent electrical shocks and fires caused by leakage currents.
• Modular Design: Easily mounts on a DIN rail for straightforward installation in electrical panels.
• Compliance: Meets international safety standards for electrical protection.